Need Help? Call 877-737-0735
Not Logged on
Find an Installer
Advanced Search »
General Upkeep for Bruce Dura-Luster and Dura-Luster Plus Floors
Modified on 2007/12/27 11:58
Bruce Hardwood Floors
'''Initial Care ''' Following Installation, clean with Bruce No-Wax Floor Cleaner. '''Routine Care''' Frequently sweep or vacuum the floor to remove loose dirt before it can scratch or be ground into the floor's surface. For spot cleaning, apply cleaner onto a clean cloth and rub onto the spot. Never apply wax topicals to your urethane floor. '''Periodic Care''' Follow sweeping and vacuuming instructions for Routine Care. Spread cleaner directly on the floor and wipe with a sponge mop or appropriate cleaning applicator. DO NOT allow puddles of Bruce No-Wax Cleaner to remain on floor's surface. Excess liquid may damage the fiber of the wood. '''An Ounce of Prevention ''' Never clean or wet mop your Bruce hardwood floor with water. Do not use any wax or cleaner that must be mixed with water such as oil soap, as this may ruin your floor and result in a loss of warranty. Water can dull the finish and permanently damage the floor. If your floor abuts exterior doors, put outside door mats at the entrances to keep dirt and moisture from being tracked in. Inside, you may want to add an area rug to further prevent dirt and moisture from being tracked onto your hardwood floor. Don't use rubber, foam back, or plastic mats as they may discolor the floor. To prevent slippage of area rugs, use an approved vinyl rug underlay from a reliable manufacturer. Area rugs should be moved occasionally as they block sunlight which may give the appearance of discoloring under the rug. Use Bruce floor protectors on the feet of furniture to avoid scratches. Bruce has several sizes of floor protector pads available. When moving heavy furniture or appliances, use extra caution to help avoid scratching, indentations, and gouging. Some objects may be too heavy to be moved across a hardwood floor under any circumstances. Certain types of casters on furniture may damage hardwood flooring. Barrel-type caster wheels or wide, flat glides are best for protecting your hardwood floor. If your furniture does not have the right type of caster, we recommend that you change them. A humidifier is recommended to prevent excessive shrinkage of wood floors due to low humidity levels. Wood stoves and electric heat tend to cause very dry conditions. A humidity level of 35-55% is recommended. In damp conditions, proper humidity levels can be maintained with an air conditioner or dehumidifier, or by periodically turning on your heating system during the summer months. Spike or stiletto high-heel shoes, especially those in poor repair, may cause denting and related damage to hardwood floors due to the extremely high compressive force they generate. Such footwear can produce dynamic loads in excess of 1000 pounds per square inch, even when worn by someone of slight or average build. Bruce will not accept claims from damages which arise from such exposure.
site contents and logo are property of 1A Industries, Inc.
Copyright © 2004 All rights Reserved.
Phone Orders Accepted: Monday-Friday 9am-5pm EST; Toll Free#(US ONLY)
P.O. Box 313